GB.SILVERF120.181005
Dismantle the heat exchanger motor +
mounting bracket (6 bolts). Move the motor
+ mounting bracket into position shown in
the illustration and temporarily secure them
with two screws Place the rotor drive belt
around the motor belt pulley.
Slacken off the two screws
holding the motor + mount-
ing bracket. Move the motor +
mounting bracket back to their
original positions. Secure the
motor + mounting bracket with
bolts (6 bolts).
See also Section 1.7.3 Common for Alternatives 1 and 2
10
www.swegon.com
We reserve the right to alter specifications.