T-COM Speedport OptoLAN Manual page 26

Speedport OptoLAN / T-Com_en / A31008-M1062-A151-2-7419 / anhang.fm / 12.09.2006
10 Appendix
Appendix
This appendix contains the following information
■
■
■
■
■
■
■
Problems and aids for self-troubleshooting
If your Speedport OptoLAN does not react as expected, first try to solve
the problem yourself using the following table.
Problem
The optical LED does
not light up or blink.
Problems and aids for self-troubleshooting (page 10)
Customer Service (page 11)
CE certification (page 12)
Warranty (page 13)
Cleaning (page 14)
Returning used devices (page 14)
Drilling template
Possible cause
The POF cable is not
connected correctly.
The POF cable is bent
or damaged in some
other way.
The Speedport Opto-
LAN power supply is
not connected cor-
rectly.
Remedy
Connect the POF
cable as described in
the installation
instructions,
see page 7.
Check the POF cable.
Remove any bends
or, if necessary,
replace the POF
cable. Contact Cus-
tomer Service if the
POF cable is irrepara-
bly damaged
(see page 11).
Connect the power
supply correctly.