Table of Contents
Advertisement
Available languages
Available languages
Speedport OptoLAN / T-Com_en / A31008-M1062-A151-2-7419 / starting.fm / 12.09.2006
Getting started 9
Never plug the power supplies into a power socket until
you are sure they match the values specified on the type
label: This could destroy the power supply and the device,
and you could suffer physical harm.
Note
When the cables are connected correctly, the power and
optical LEDs light up on both Speedport OptoLANs. If the
connected Ethernet devices (e.g. router, set-top box) are
also switched on and an Ethernet connection has been
established, the LAN LEDs will also light up, see page 3.
Advertisement
Table of Contents
Need help?
Do you have a question about the Speedport OptoLAN and is the answer not in the manual?
Questions and answers