Maytag MDE20PDAGW Installation Instructions Manual page 24

ELECTRONIC CONTROL SETUP INSTRUCTIONS
(PD & PN MODELS ONLY)
Code Explanation
1. 00 MONEY COUNTER OPTION
This option is either NOT SELECTED "OFF" or
SELECTED "ON."
1. 00 Not Selected "OFF."
1. 0C Selected "ON."
• Press the DELICATES button 3 consecutive times
to select "ON" and 3 consecutive times to remove
(Not Selected "OFF"). Counter resets by going from
"OFF" to "ON."
1. C0 Selected "ON" and not able to be deselected.
• To select "ON" and not able to be deselected,
first select "ON," then within 2 seconds, press the
DELICATES button twice, the HEAVY DUTY button
once, and exit set-up mode.
• Press the NORMAL button once to advance to
next code.
2. 00 SPECIAL PRICING OPTIONS
This option is either NOT SELECTED "OFF" or
SELECTED "ON."
2. 00 Not Selected "OFF," and next available code will be
A.00.
2. SP Selected "ON."
• Press the DELICATES button once to change this
selection.
If SPECIAL PRICING OPTION is selected, there is access to
codes "3.XX" through "9.XX."
• Press the NORMAL button once to advance to
next code.
If money counter (1.0C or 1.C0) is selected, the following is
true:
3 00 Dollars in HUNDREDS
4 00 Dollars in ONES
5 00 Number of CENTS
24
OPTIONS 3.XX – 9.XX TO USE IF SPECIAL PRICING
IS SELECTED
Code
3.06
3.06
4.05
4.05
5. 00
5. 00
6. 00
6. 00
3 01 = $100.00
4 68 = $ 68.00
5 75 = $ 00.75
TOTAL = $168.75
Explanation
SPECIAL CYCLE PRICE
Represents the number of quarters (coin 1)
to start the dryer; may adjust from 0–39.
(See VALUE OF COIN 1 b.05.)
• Advance from 0–39 by pressing the HEAVY DUTY
button. Factory default of 6 quarters = $1.50.
• Press the NORMAL button once to advance to
next code.
SPECIAL DRY TIME
Represents the number of minutes per quarter (coin 1).
• Factory default of 5 minutes per coin.
Example: 6 quarters x 5 minutes = 30 minutes.
• By pressing the HEAVY DUTY button, the value can
be adjusted from 1–75 minutes.
• Press the NORMAL button once to advance to
next code.
TIME-OF-DAY CLOCK, MINUTES
This is the TIME-OF-DAY CLOCK, minute setting;
select 0–59 minutes by pressing the HEAVY DUTY
button.
• Press the NORMAL button once to advance to
next code.
TIME-OF-DAY CLOCK, HOURS
NOTE: Uses military time or 24 hr. clock.
This is the TIME-OF-DAY CLOCK, hour setting; select
0–23 hours by pressing the HEAVY DUTY button.
• Press the NORMAL button once to advance to
next code.