Advertisement
＜A setup of this product＞
1
. Please connect the SNMP/Web card inserted in the uninterruptible power supply(UPS)
to a network.
2
. Next, please perform a Windows command prompt according to the following
procedures. [Start] -> [Command prompt]
3
. The following command prompt screens are displayed.
4
. Please input the unique IP address (initial value: 192.168.2.150) of a SNMP/Web card.
Please input by a command prompt as follows.
Input example）
Telnet 192.168.2.150
※When the IP address of a SNMP/Web card is changed, please input the IP
address.
SNMP/Web Card Install Guide
13
Advertisement
