Menu Set E Whr Settings; Tank Setpoint - Lochinvar EcoShield SHW60-325CE Installation, Commissioning And Maintenance Instructions

16.3

MENU SET E WHR SETTINGS

16.3.1

TANK SETPOINT

When a DHW call for heat becomes active, the control will use the tank setpoint to determine the firing rate of the
water heater based on the actual water temperature. The desired temperature can be adjusted in ½ increments
using the Up or Down buttons and the desired value stored by pressing the Enter/Reset button. The temperature
range of this parameter is 0C to 80C. The default value is 65C.
41