Table of Contents
Advertisement
FIM-7920E interface module
FIM-7920E C1 to C4 interface combinations
The following table shows the different combinations of interface speeds that you can set up with the FIM-7920E C1 to
C4 front panel interfaces.
100GE QSFP28
40GE QSFP+
10Ge SFP+
Supported transceivers and breakout cables
Transceivers available from Fortinet for the FIM-7920E C1 to C4 QSFP28 interfaces.
Transceiver
FG-TRAN-QSFP28-SR4
FG-TRAN-QSFP28-LR4
FG-TRAN-QSFP+SR
FG-TRAN-QSFP+LR
Breakout cables available from Fortinet for the FIM-7920E C1 to C4 QSFP28 interfaces.
Breakout
FG-TRAN-QSFP-4XSFP
FG-TRAN-QSFP-4SFP-5
Changing the interface type and splitting the FIM-7920E C1 to C4
interfaces
By default, the FIM-7920E C1 to C4 interfaces are configured as 100GE QSFP28 interfaces. You can use the following
command to convert them to 40GE QSFP+ interfaces. Once converted, you can use the other command below to split
them into four 10GBASE-SR interfaces.
Changing the interface type
For example, to change the interface type of the C1 interface of the FIM-7920E in slot 1 to 40GE QSFP+ connect to the
CLI of your FortiGate-7000 system using the management IP and enter the following command:
config system global
set qsfp28-40g-port 1-C1
FIM-7920E Processing Module Guide
4
3
3
2
2
x
1
x
2
1
x
x
4
x
4
Description
100 GE QSFP28 transceivers, 4 channel parallel fiber, short range.
100 GE QSFP28 transceivers, 4 channel parallel fiber, long range.
40GE QSFP+ transceivers, short range.
40GE QSFP+ transceivers, long range.
Description
40GE QSFP+ Parallel Breakout Active Optical Cable with 1m length.
40G QSFP+ Parallel Breakout MPO to 4xLC connectors, 5m reach.
2
1
1
1
x
3
2
1
8
x
4
8
12
1
x
x
x
x
4
3
2
x
4
8
Fortinet Technologies Inc.
9
x
x
1
x
12
16
Advertisement
Table of Contents
