Table of Contents
Advertisement
FIM-7920E interface module
Front panel LEDs
From the FIM-7920E font panel you can view the status of the module LEDs to verify that the module is functioning
normally.
LED
State
Off
Green
STATUS
Flashing Green
ALARM
Red
Amber
Off
Off
Green
HA
Red
POWER
Green
Off
Green
C1 to C4
Flashing Green
Off
M1 and M2
Green
Flashing Green
Off
Solid Green
MGMT1-4
Blinking Green
Link/Act
Off
Green
MGMT1-4
Amber
Speed
Off
FIM-7920E Processing Module Guide
Description
The FIM-7920E is powered off.
The FIM-7920E is powered on and operating normally.
The FIM-7920E is starting up.
Major alarm.
Minor alarm
No alarms
The FIM-7920E is operating in normal mode.
The FIM-7920E is operating in HA mode.
A failover has occurred
The FIM-7920E is powered on and operating normally.
The FIM-7920E is powered off.
The correct cable is connected to the interface and the connected equipment
has power and is connected at 100Gbps or 40Gbps. If the port is split the LED
will light as long as at least one of the 10Gbps connections is active.
Network activity at the interface.
No link is established.
The correct cable is connected to the interface and the connected equipment
has power.
Network activity at the interface.
No link is established.
Indicates this interface is connected with the correct cable and the attached
network device has power.
Indicates network traffic on this interface.
No Link
Connection at 1Gbps.
Connection at 100Mbps.
Connection at 10Mbps.
Fortinet Technologies Inc.
8
Advertisement
Table of Contents
