Led Indications - Stanley Dubuis BCP065C Instruction Manual

LED INDICATIONS

Starting ON the tool
GREEN GREEN
Stopping OFF of the tool
RED RED
Battery charge level
- -
- -
- -
Battery protection CUT-OFF
- -
Temperature protection
YELLOW YELLOW
ORANGE ORANGE
Tool security
-
RED
Maintenance indication
-
ORANGE
Maintenance indication
-
ORANGE
Return for maintenance
-
RED
Tool connected to USB
-
BLUE
0915 - BCP065C - 17
Press the button ON/OFF tool.
The 3 LED lighting GREEN for 1 second.
The front DEL lighting.
GREEN
The tool is ready for work.
Press the button ON/OFF tool.
The 3 LED lighting RED for 1 second. The tool switches OFF.
-
The tool switches OFF automatically without use during 10min.
RED
After powering ON the tool, if the LED battery is lighting GREEN, the battery is
full charged.
-
GREEN
After powering ON the tool, if the LED battery is lighting ORANGE, the battery
-
is half charged.
ORANGE
After powering ON the tool, if the LED battery is lighting RED, the battery is
- discharged. The battery must be recharged. Replace the battery by a full
RED
charged battery.
If the battery is not powerful enough for one cycle, the tool is automatically
locked. The LED battery flashing RED. The front DEL flashing.
Erreur !
DO NOT RELEASE. Remove the empty battery and replace it by a full one.
Liaison
FINISH CUTTING WITH CHARGED BATTERY.
incorrect
RED
Recharge the empty battery.
e.
Erreur !
Liaison
-
The front DEL flashing.
incorrect
e.
For user security, the tool is blocked automatically in case of problem. The LED
maintenance flashing RED during 10 seconds.
Press the button ON/OFF tool.
- -
If the indication reappears, return the tool to the DUBUIS after-sales Service.
The LED maintenance lighting ORANGE all the time after ON to indicate the
future maintenance.
The user has 1000 cycles before the final block of the tool.
- -
Return the tool to the DUBUIS after-sales Service.
The LED maintenance flashing ORANGE all the time after ON. The tool is au-
tomatically locked after each cutting.
Press the button ON/OFF tool.
- -
The user has 500 cycles before the final block of the tool.
Return the tool to the DUBUIS after-sales Service.
Erreur !
The LED maintenance flashing RED. The tool is definitively locked.
Liaison
Return the tool to the DUBUIS after-sales Service.
-
incorrect
e.
When the tool is connected to the USB port, the LED maintenance lighting
BLUE during the connection.
- -
If the temperature is out of range of use, the cycle and maintenance LED
flashing YELLOW and ORANGE. The tool can't be used.
LED lighting for 1 second
LED flashing
LED lighting
English