Stanley Dubuis BCP065C Instruction Manual page 16

English
Nut
Unscrew the nut with 27mm open-end wrench
and a 20mm open-end wrench for the axis.
Remove the axis
Blades axis
Remove the circlips with circlips pliers and then
remove the blades axis
Grease
0915 - BCP065C - 16
Axis
Circlips
Reassemble in the reverse order to dismantling.
Grease the 3 axis.
Screw the nut to maximum in order to close the blades without forcing.
MAKE SURE THAT THE BLADE IS IN THE RIGHT WAY ROUND
CHANGE THE BLADES
Move the blades in order to appear blades axis.
Blades
Remove the blades réf.78441.
Nut
Blades axis
Grease