10. Activate / Deactivate daylight sensor
Daylight sensor is active by default. Changes have to be performed on each luminaire
in the group.
Point remote to any luminaire and press
a.
"unlock," once.
Wait for LED to stop blinking (apx. 10
seconds).
Point remote to any of the luminaires
and press "send."
Press "daylight" button.
b.
While the LED is still blinking red, enter
the numbers:
"1": Disable daylight sensing
"2": Enable daylight sensing
Philips Lighting North America
SpaceWise for Industrial Applications
Red LED on remote will start
blinking.
Red LED on remote will stop
blinking.
The luminaire will FLASH twice
and group light level will go to
50%.
Red LED on remote will start
blinking.
Red LED on remote will stop
blinking.
v. 1.6
20