Philips IRT 9090 User Manual page 12

Point to any of the luminaires in the
group, press "send."
If unsure about mode selection or remote blinking status then wait for the
remote blinking to stop and redo step "b."
Point to any of the luminaires in the
c.
group and press "lock."
Wait for LED to stop blinking (apx. 10
seconds) then press "send."
Philips Lighting North America
SpaceWise for Industrial Applications
The luminaire will FLASH twice
and group light level will go to
50%.
Red LED on remote will start
blinking.
The luminaire will FLASH twice.
Group is ready for normal
operation.
v. 1.6
11