Point remote to any luminaire and press
a.
"unlock," once.
Wait for LED to stop blinking (apx. 10
seconds).
Point remote to any of the luminaires
and press "send."
Press "pir" button.
b.
While the LED is still blinking red, enter
the numbers:
"11": Enable path of egress feature
"10": Disable path of egress feature
Philips Lighting North America
SpaceWise for Industrial Applications
Red LED on remote will start
blinking.
Red LED on remote will stop
blinking.
The luminaire will FLASH twice
and group light level will go to
50%.
Red LED on remote will start
blinking.
Red LED on remote will stop
blinking.
v. 1.6
26