Voice Control - Seat Toledo Manual

Voice control

Operation
Voice control: main screen (model
Fig. 12
displayed: Navi System)
Many radio, media, telephone and navigation
functions may be performed through voice
commands.
The Infotainment system's voice control will
only be available for the language selected in
›››
System setup page 92.
›››
Setup of voice control page 17.
Start and stop the voice control
● To activate the voice control, briefly press
the button on the multi-function steering
wheel . It can also be activated with the
VOICE button in the Infotainment system.
● When you activate voice control, a tone will
be heard for the start of the dialogue and the
Introduction
voice control main screen will be displayed,
›››
Fig. 12, (the main screen will appear in the
format selected in Voice control settings
›››
page 17). The spoken instructions will
guide you through the following "dialogue".
● Pronounce the desired order and follow the
instructions of the "dialogue". A function can
often be activated with different spoken com-
mands. If in doubt, try giving a command or
say Help.
● When an action is performed (e.g. calling a
contact), the voice control automatically de-
activates and must be reactivated again
when needed. There are certain commands
after which the voice control does not end
and waits with What do you wish to do
now? .
● To finish voice control manually, either
press and hold the  button on the multi-
function steering wheel until the correspond-
ing confirmation signal is heard or give two
quick presses on the  button on the steer-
ing wheel, or on the button of the in-
VOICE
fotainment system, or press the  function
button in the top right corner of the screen.
● Voice control can also be ended by giving
the following orders: End Voice Control or
Cancel.
Help with voice control
Listening to Help when using voice control for
the first time is recommended.
● Activate voice control  / VOICE
Give the Help command in the language
●
established in the System setup
low the dialogue instructions. The Help com-
mand can also be spoken followed by the in-
fotainment system function, for example,
"Help with the navigation".
Interaction with the dialogue mode
Icons in the top left corner:
The system is expecting a command

from the user.
The system has recognised a command

and will act shortly.
The system is sending a spoken com-

mand and confirms the command given.
The system is in pause mode. (max. 3

minutes).
 /  Hide or show the voice control menu
›››
Fig. 12.
Operation during the dialogue
While the infotainment system transmits a
spoken indication, the display will show the
symbol .
The announcement can be stopped by
●
pressing the upper left icon on the screen,
the  button on the steering wheel or the
VOICE button, and voice recognition for the
user will resume.
.
, and fol-
»
15