Installing The Sun2000 - Huawei SUN2000-2KTL-L0 Quick Manual

Support-mounted Installation
Prepare M8 stainless bolt assemblies (including flat washers, spring washers, and M8 bolts) with
appropriate lengths as well as matched flat washers and nuts based on the support specifications.

Installing the SUN2000

3.3

If the bottom of the mounting plate does not snap into place, push the SUN2000 from the front
until the bottom of the mounting plate snaps into the mounting bracket.
 The anti-theft lock needs to be prepared by the customer.
1. Install the SUN2000 on the
mounting bracket.
2. Tighten screw assemblies.
4
You are advised to apply anti-rust paint
on the hole positions for protection.
3. (Optional) Install an
anti-theft lock.