Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for CITC BUBBLE BUDDY
Summary of Contents for CITC BUBBLE BUDDY
- Page 1 BUBBLE BUDDY Operating Instructions P/N 100189 (110 VAC)
- Page 2 To guarantee perfect and successful work with this machine, please take some time to read the manual carefully. And finally, we believe you will enjoy years of great bubble effects if you care for and maintain your BUBBLE BUDDY CITC 2100 196 St.
-
Page 3: Table Of Contents
Contents 1. Set of Equipment Supplied 2. Accessories and Parts 3. Description 4. Safety Instructions 5. Operating the Bubble Buddy 5.1 Selecting the Location 5.2 Electrical Power Requirements 5.3 Hooking things up 5.4 Operating the machine 5.5 DMX Control 5.6 Rest Period 5.7 Shut Down... -
Page 4: Set Of Equipment Supplied 3
1. Set of Equipment Supplied Bubble Buddy " Hanging Bracket " Remote with cycle-timer and 25’ (7.6m) cord OR DMX Control " Power cord " Operating Instructions Booklet " 2. Accessories and Parts Bio-Bubble Fluid P/N 150810 and Bubblessence P/N 150131 (available in "... -
Page 5: Safety Instructions
Remote for the DMX controller. Use the long distance Director Jr. Fan for 40’ (12m) launch of bubbles or the Director Fan for 70’ (21m) distance. The Bubble Buddy comes with a 25’ (7.6m) remote and cycle-timer. 4. Safety Instructions WARNING: Read and understand all labels and operating instructions before attempting installation. -
Page 6: Operating The Bubble Buddy
5. Operating the BUBBLE BUDDY 5.1 Selecting the Location Place bubble machine on a flat surface, or hang it in a horizontal position only. Keep the Bubble Buddy upright and level. Allow an open area in front of the machine for the bubbles to disperse. -
Page 7: Operating The Machine
“Bubble” for short bursts of bubbles. Optional DMX Control With optional DMX control, you will be able to turn the Bubble Buddy on/off. (See section 5.9 for more details on DMX operation.) 5.6 Rest Period... -
Page 8: Notes On Optional Dmx Operation
When I plug in the remote stereo phono plug, it keeps running. Check to be sure buttons on remote are not depressed. A small switch inside of the phono jack turns off the machine when plugged fully into socket. How do I attach the DMX? (see section 5.9). When I plug in the remote, I have no control. -
Page 9: Service And Maintenance
Service and Maintenance Care of your Bubble Buddy will give you years of service. Note: cleaning your unit is going to pay off in constant good performance. Regular cleaning of the bubble wheel is required. To clean, add warm water to the tray and turn on machine, allowing the wands to be completely submerged over and over for ten minutes. -
Page 10: Technical Data 9
Technical Data Bubble Buddy Technical Data P/N 100189 Dimensions 14" x 7" x 7" (36cm x 18cm x 18cm) Weight 12 lb (5.5 kg) Shipping Dimensions 16” x 10” x 12” (41cm x 26cm x 31cm) Shipping Weight 14 lbs (6.4 kg) - Page 11 4. Freight costs to CITC when under the limited warranty services are the responsibility of the customer. CITC will pay freight upon return.
- Page 12 If you should send the unit for service, do not forget to remove any liquid from the fluid bottle. Obtain your RMA# by calling CITC. Payment arrangements for repair must be made before receiving RMA # in case unit is not covered under Limited Warranty.
Need help?
Do you have a question about the BUBBLE BUDDY and is the answer not in the manual?
Questions and answers