Using Your Convection Heater - Zanussi ZCVH4002 Manual

USING YOUR CONVECTION HEATER

⁰F/⁰C TEMPERATURE SETTING
1. The temperature of the heater can be shown in ⁰F or ⁰C.
Touch the ⁰F / ⁰C button to change the temperature on
the display to either ⁰F or ⁰C. The default setting is ⁰C.
LCD DISPLAY
1. The LCD display will show the ambient temperature of the
room it is placed in and the temperature it has been set to
reach.
2. The display will also show the heat setting that has been
selected, if the timer has been selected/set and if the fan
has been selected.
Safety Protective Devices - The appliance is fitted with an over
heat protection system.
• Overheat protection - the power to the heating elements
will automatically cut off if the temperature of the heating
elements exceeds a certain limit. In the event of
overheating, the heater will stop operating. Once the
appliance has completely cooled the appliance will then
resume operating as normal.
Page 12