AEG Thyro-A H1 Series Operating Instructions Manual page 15

Tab. 3 Interpretation of the master setpoint with Thyro-S
Setpoint (Master)
0 to 409
410 to 1091
1092 to 1706
1707 to 3071
3072 to 4096
Tab. 4 Cyclic input and output data with Thyro-S ..H1
Offset
0 Load voltage L1
4 Mains voltage L1
6 Total setpoint
8 Fault (see table 5b)
10 Status (see table 5b)
Offset Output data, setpoint
0 Master Setpoint
Tab. 5 Cyclic input and output data with Thyro-S ..HRL1
Offset
0 Load voltage L1
4 Load current L1
8 Mains voltage L1
10 Total setpoint
12 Fault (see table 5b)
14 Status (see table 5b)
Offset Output data, setpoint
0 Master setpoint
Tab. 5b Thyro-S Faults
Description
Frequency measurement outside of 47 Hz to 63 Hz
SYNC error, no zero-crossing within the gate
Temperature monitoring triggered
Load fault
Flash values invalid
Mains undervoltage (<AD_P_SPG_MIN)
Mains overvoltage (>AD_P_SPG_MAX)
Status (return value)
Input data, actual values
Input data, actual values
= OFF
1/5
= 1/3
1/2
= ON
Data type
float
integer
integer
integer
integer
Data type
integer
Data type
float
float
integer
integer
integer
integer
Data type
integer
Bit
Bit 0 Test LED flashing slowly
Bit 1 Test LED flashing slowly
Bit 2 Load Fault flashing slowly
Bit 3 Load Fault on
Bit 4 Test LED and Load Fault LED
flashing simultaneously quickly
Bit 5 Load Fault LED and Test LED on
Bit 6 None
15
(Total setpoint)
0 =
819
1365 =
2047
4096
Size Unit
4 [V]
2 [V]
2 4096=100%
2
2
Size Unit
2 4096=100%
Size Unit
4 [V]
4 [A]
2 [V]
2 4096=100%
2
2
Size Unit
2 4096=100%
LEDs Relay
closed
-
-
-
-
open
open
open
open
open
open