Table of Contents
Advertisement
3 Product Description
3 Product Description
3.1 General description
Description
A pump station is a pre-engineered and fabricated line of packaged booster systems that
provides:
• Energy efficiency
• System protection
• Hydraulic capability up to 780 GPM
• Boost pressures up to 270 PSI
Intended applications
WARNING:
This product can expose you to chemicals including Lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more
information go to: www.P65Warnings.ca.gov.
The pump station is intended for these applications:
• High rise buildings
• Industrial plants
• Municipal and rural water districts
• Agriculture / irrigation
• General water pressure boosting
3.1.1 Operational limits
Pressure
This table describes the pressure ratings for a pump station using the pump model shown
Pump system type
e-SV Pumps
3.2 Nameplate information
Important information for ordering
Every pump station has a nameplate that provides information about the pump station.
The pump station nameplate is located on the inside of the control enclosure door.
When ordering spare parts, be prepared to identify the nameplate information when
contacting the factory.
• Model
• Size
• Serial number
• Item numbers of the required parts.
10
TECHNOForce e-HV Mechanical Installation, Operation, and Maintenance Manual
Max. discharge pressure
270 PSI
Advertisement
Table of Contents
