Subscribe to Our Youtube Channel
Related Manuals for TriTeq MicroIQ UT
Summary of Contents for TriTeq MicroIQ UT
- Page 1 MODELS: UT CT ST Station mode instructions For Office furniture, storage cabinets, lockers, safes, vaults, secured enclosures...
- Page 2 When pressed the green LED will illuminate. Proceed Yellow Keypad Low battery Infrared Receiver: Receives a signal from an electronic TriTeq key-fob when it is pointed at the receiver located behind the program button. Knob: Battery holder with cover Location to...
- Page 3 Station Mode Programming Instructions: CHANGE THE MASTER CODE (6 DIGITS) USING THE FACTORY MASTER CODE factory master code factory master code new master code (2x) Example: 135243 135243 112233 112233 Result: Factory master code 135243 was erased and the new master code 112233 was accepted CHANGE THE SUPERVISOR CODE (3-6 DIGITS) USING THE FACTORY SUPERVISOR CODE factory supervisor code new supervisor code...
- Page 4 CHANGE THE SUPERVISOR CODE (3-6 DIGITS) USING THE MASTER CODE master code new supervisor code (6x) Example: 123455 (6x) Result: Master code 123455 was used to change the supervisor code to 531 ADD A CONTROL FOB master code point blue control fob and press the fob button (6x) Example:...
- Page 5 ADD A USER FOB USING THE SUPERVISOR CODE supervisor code point black user fob and press the fob button (6x) Example: (6x) Result: Supervisor code 543 was used to add a user fob ADD A USER FOB USING THE SUPERVISOR FOB point black supervisor fob and press the fob button point black user fob...
- Page 6 REMOVE THE USER CODE AND USER FOB USING THE SUPERVISOR CODE 1 1 1 1 1 supervisor code (6x) Example: (6x) 11111 Result: Supervisor code 543 was used to remove to remove the user code and user fob REMOVE THE USER CODE AND USER FOB USING THE SUPERVISOR FOB 1 1 1 1 1 point black supervisor fob and press the fob button...
Need help?
Do you have a question about the MicroIQ UT and is the answer not in the manual?
Questions and answers