Viewing Rpvst+ Vlan And Vport System Limits - Hewlett Packard Enterprise Aruba 2530 Advanced Traffic Management Manual

Viewing RPVST+ VLAN and vPort system limits

Each switch model supports a maximum number of active virtual ports (vPorts). New port VLAN
memberships cannot be created once the vPort limit has been reached. Also, there is a maximum
recommended number of active vPorts for each fixed-port switch or each module in a chassis switch.
Exceeding the maximum recommended number of vPorts can result in dropped BPDUs and potential
network loops. This command displays the current vPort status and maximum recommended vPort total
per-switch or, for modular switches, per-module.
Syntax:
show spanning-tree system-limits rapid-pvst
Displays the RPVST+ VLAN and virtual port (vPort) status on the switch.
Viewing RPVST+ VLAN and vPort system limits
switch(config)# show spanning-tree system-limits rapid-pvst
Spanning Tree Information
STP Enabled
Mode
RPVST Enabled VLANs
Switch MAC Address
Count of RPVST Enabled VLANs
Maximum Allowed RPVST Enabled VLANs
Count Of Total Virtual Ports
Maximum Allowed Virtual Ports
Ports
-------------------- --------------- --------------- --------------------
Ports 1-24
Chapter 9 Rapid per-VLAN spanning tree (RPVST+) operation
: Yes
: RPVST
: 20
: 002347-c651c0
: 1
: 400
: 24
: 424
Current Operational
Virtual Ports Virtual Ports
24 2
Recommended Maximum
Virtual Ports
200
237