Pairing Your Device; Manual Pairing - iHome iBT8080 Instruction Manual

Pairing Your Device

Pairing is the set-up process to introduce your Bluetooth-capable device to
the iBT8080. Once your device is paired, the iBT8080 can recognize it and
you can play your audio through it.
o on
iHome iBT80

Manual Pairing

o on
1. Turn on your Bluetooth device and make it "discoverable"
by turning on Bluetooth mode (check in Options or
Settings).
2. Slide the Power On/O Switch to ON to turn on the
iBT8080. The first time the unit is powered on, it will
enter auto-pairing mode: the unit will beep and the
Bluetooth status indicator light on top of the unit will
flash quickly while the unit attempts to pair. (If Color
Mode is on, the cabinet lights will flash blue and red.)
"iHome iBT8080" should appear in your device's
Bluetooth menu. Select "iHome iBT8080" on device to
begin/complete pairing. If prompted for a passcode, enter
"1234" on your device's keypad. 1 beep will sound and the
Bluetooth status indicator light will appear solid blue (in
Color Mode, cabinet will flash blue twice), indicating the
iBT8080 paired and ready to play music. There should
also be an indication on your device. If no device is
successfully paired within 3 minutes the iBT8080 will
default to previous mode.
3. To pair with a di erent device or at a di erent time, make
sure unit is powered on, then press and hold the
Bluetooth/Speakerphone Button for 2 seconds. Select
"iHome iBT8080" on device to pair.
Once the iBT8080 is paired to a device, it will attempt to
autolink when the device is within range (about 33 feet).
1. Slide the Power O /On Switch on each speaker to ON.
Wireless Stereo linking should take about 10 seconds.
2. Press and hold the Bluetooth/Speakerphone Button
(located on the back) on the left speaker for 2 seconds.
3. Select "iHome iBT8080" on your device's Bluetooth menu
to complete pairing.
Using the
iBT8080
7