Pairing Your Device - iHome iBT76 Instruction Manual

Pairing Your Device

Pairing is the set-up process to introduce your Bluetooth-capable device to
the iBT76. Once your device is paired, the iBT76 can recognize it and you can
play your audio through it.
o on
iHome iBT76
1. Turn on your Bluetooth device and make it "discoverable"
by turning on Bluetooth mode (check in Options or
Settings).
2. Slide the Power On/O Switch to ON to turn on the
iBT76. The first time the unit is powered on, it will enter
auto-pairing mode: the unit will beep and the Bluetooth
status indicator light on top of the unit will flash quickly
while the unit attempts to pair. (If Color Mode is on, the
cabinet lights will flash blue and red.) "iHome iBT76"
should appear in your device's Bluetooth menu. Select
"iHome iBT76" on device to begin/complete pairing. If
prompted for a passcode, enter "1234" on your device's
keypad. 1 beep will sound and the Bluetooth status
indicator light will appear solid blue (in Color Mode,
cabinet will flash blue twice), indicating the iBT76 is
paired and ready to play music. There should also be an
indication on your device. If no device is successfully
paired within 3 minutes the iBT76 will default to previous
mode.
3. To pair with a di erent device or at a di erent time, make
sure unit is powered on, then press and hold the
Bluetooth/Speakerphone Button for 2 seconds. Select
"iHome iBT76" on device to pair.
Once the iBT76 is paired to a device, it will attempt to
autolink when the device is within range (about 33 feet).
Using the
iBT76
6