3
Use
3.1 Intended use
The appliance was designed to be used in houses,
and is not fit for industrial use.
3.2 Attaching/removing the hose
1. To attach the hose (3) pull the hose cap (8) in
the direction of arrow until it is aligned with the
housing.
2. To remove the hose (3) press on the tabs on the
hose cap (8) and pull it.
3.3 Attaching/removing the tele-
scopic tube
1. Attach the telescopic tube (2) to the handle (1).
2. Push the telescopic tube adjustment latch (4) in
the arrow direction and pull the telescopic tube
(2) to adjust its length.
3. Pull the telescopic tube (2) from the handle (1)
to remove it.
3.4 Attaching/removing the parquet/
carpet brush
You can attach/remove the telescopic tube (2)
from the parquet/carpet brush (6) as indicated in
the below figure.
Vacuum Cleaner / User Manual
3.5 Adjusting the parquet/carpet
brush
By pressing the adjustment latch (4) located on the
parquet/carpet brush (6);
Vacuum on firm ground and parquet, extend
•
the brush before vacuuming.
Vacuum on carpets and rugs, retract the brush
•
before vacuuming.
3.6 Operation
1. Open the lid pushing the water container locking
latch (9) upwards.
2. Remove the water tank holding it from its lugs.
7 / 21 EN