Cleaning & Maintenance - Aqualisa MIDAS 110 Installation Instructions Manual

3
Rotate the spray plate lever clockwise or anti-clockwise to
select the desired spray pattern.
N.B. ON THE MIDAS 110 HARMONY HEAD, WHEN
THE LEVER IS IN THE 3 O'CLOCK POSITION WHEN
VIEWED FROM BELOW, THE WATER SAVING MODE
IS SELECTED. THIS PROVIDES THE SAME SPRAY
PATTERN AS POSITION 3, BUT, DEPENDING ON
WHICH WATER SYSTEM THE PRODUCT IS FITTED
TO, OFFERS UP TO 25% WATER SAVING.
CLEANING & MAINTENANCE
Your Midas shower system should be cleaned using only a soft cloth and washing up liquid.
! DO NOT USE ABRASIVE CLEANERS.
To reduce the need for chemical descaling in hard water areas, your shower head incorporates a 'clear
flow' system, whereby any scale build up can be broken down by gently rubbing the flexible tips of the
jets during use. This procedure should be completed regularly, as often as once a week in some hard water
areas, as scale build up can a ect the spray pattern and cause the shower to perform poorly. Failure to
descale the shower head can a ect the internal seals and may a ect the warranty.
Should chemical descaling of the head become necessary, remove the shower head fully and immerse in
a mild proprietary descalent.
IT IS IMPERATIVE THAT DESCALING IS CARRIED OUT STRICTLY IN ACCORDANCE WITH
THE MANUFACTURERS INSTRUCTIONS. SUBSTANCES THAT ARE NOT SUITABLE FOR
PLASTICS AND ELECTROPLATED SURFACES MUST NOT BE USED.
31