Related Manuals for BayTech DS71-MD4
Summary of Contents for BayTech DS71-MD4
- Page 1 2019 DATA SWITCH DS71‐MD4 Quick Start COPYRIGHT 2019 Bay Technical Associates, Inc 1/1/2019 ...
- Page 2 Table of Contents MODEM LED DESCRIPTIONS ................................ 4 UNPACKING .................................... 4 CABLING ...................................... 4 RJ‐45 ...................................... 4 ABLE ........................................ 6 DAPTERS SERIAL SETUP .................................... 6 QUICK START: DS71‐MD4 SERIES .............................. 7 : ....................................... 7 ONFIGURATION Serial 1: Port Pin out Table _____________________________________________________________________________________ 5 Serial 2: RJ08X007 Pin out _____________________________________________________________________________________ 5 ...
- Page 3 DS71‐MD4 Serial & 56K Modem Host Module Replaces DS71‐MD3, 33.6K modem ...
-
Page 4: Modem Led Descriptions
Modem LED Descriptions DS71-MD4 front plate comes with five modem activity LEDs. These LEDs are marked as TX, RX, CD, OH, and CX. These LEDs are described below. TX (Transmit Data): Indicates the modem is transmitting data. RX (Receive Data): The modem is receiving data. -
Page 5: Serial 1: Port Pin Out Table
Adapter signals Listed are the pin specifications for the BayTech cable and adapters and the terminal COM ports: Serial 1: Port Pin out Table Signal RS-232 RS-232 Port COM Port COM Port Signal Port (DS) (RPC) DE-9 Pin DB-25 Pin RJ08X007 Standard Rollover Cable –... -
Page 6: A Dapters
Adapters Serial 4: 9FRJ45PC-1 Adapter Pin Out Serial 5: 9FRJ45PC-4 Adapter Pin out (Use with RJ08X007 Cable and B/C switch in “B”) Serial Setup Connect the 9FRJ45PC-4 adapter to the user’s computer Connect the MODULE EIA-232 port to the adapter via the RJ08X007 rolled flat ribbon cable. ... -
Page 7: Quick Start: Ds71‐Md4 Series
QUICK START: DS71MD4 SERIES If this is a new unit shipped directly from Baytech, follow the steps. If this is a previously own unit, perform a factory reset to clear out any users and passwords still in the unit. Configuration: 1. Connect to the Serial port (EIA232) using the supplied rollover flat cable and adapter. -
Page 8: Figure 1: Network Controller
DS-RPC (3)....3 Exit........X,CR Enter Request : Figure 3: DS71-MD4 Configuration Copyright(C) Bay Technical Associates 2006 DS71-MD4 Data Switch Series - V90 Modem Host Module Revision F.1.06.00 Module 1 Status ........1 Serial Port Configuration .....2 Port Device Name ......3 Port Select Code ......4 Attention Character ....5... -
Page 9: Figure 4: Login Setup
Figure 4: Login Setup Login Setup: Header .......1 Access Control ....2 Menu ......3 Manage Users ....4 Auto Connect ....5 Dial Back Number .....6 Assign User Ports ....7 Exit ......X,CR Enter Request : Figure 5: Manage User User Management Menu: ”admin” ......1 Add New User ......A Delete User ......D Change User ......C... -
Page 10: Figure 7: Assign User Ports
Figure 7: Assign User Ports Assigned User Ports: +----+----------* +-M2-+-M3-+ |User| Name \|1234|1234| +----+------------*----+----+ 1 | admin |1234|1234| 2 | john +----+------------*----+----+ Enter User number:2 Assigned User Ports: +----+----------* +-M2-+-M3-+ |User| Name \|1234|1234| +----+------------*----+----+ 2 | john |..|..| +----+------------*----+----+ Add Port(s)......1 Remove Ports(s)......2 Add All Ports......3 Remove All Ports.......4...
Need help?
Do you have a question about the DS71-MD4 and is the answer not in the manual?
Questions and answers