Variable Branch - Lenze 8400 Software Manual

5 Appendix: Action types for the positioning sequence control
5.4

Variable branch

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.4 Variable branch
For variable branching (jumps), two actions of "variable branching" type are available.
• Branching to one of 20 possible branching destinations is carried out as a function of the input
value of wBranch1 or wBranch2 at the time of processing.
• The input value of wBranch1 defines branching for action 1.
• The input value of wBranch2 defines branching for action 2.
• If the input value is 0 or greater 20, the next step in the sequence table is processed.
• In the default setting, the wBranch1 input is linked with MCI process data input word 3.
assignment of the process data input words
• In the default setting, the wBranch2 input is not connected.
For entering the branch destinations, click the Set Up Branch... button in the parameterisation
dialog.
Parameter
Branch destination
(C01418/1...2 - C01437/1...2)
Lenze · 8400 "Position Sequencer" technology application · Software manual · DMS 1.0 EN · 07/2014 · TD05
( 18)
Possible settings
0 Branching deactivated
(The following step in the sequence
table is processed.)
1...100 Step 1 ... 100
Info
Branch destinations for input values
1 ... 20 of wBranch1...2.
Pre-
49