Headlights; Replacing An Auxiliary Light Bulb; Replacing A Front Turn Signal; Light Bulb - Yamaha FreeGo LTK125 2019 Owner's Manual

Headlights

This model is equipped with LED-type
headlights.
If a headlight does not come on, have
a Yamaha dealer check its electrical
circuit.
NOTICE
Do not affix any type of tinted film or
stickers to the headlight lens.
Periodic maintenance and adjustment
EAU64070
Replacing an auxiliary light
bulb
This model is equipped with two auxil-
iary lights. If an auxiliary light bulb
burns out, replace it as follows.
1. Remove the auxiliary light bulb
ECA16581
socket (together with the bulb) by
pulling it out.
1. Auxiliary light bulb socket
2. Remove the burnt-out bulb by
pulling it out.
3. Insert a new bulb into the socket.
4. Install the socket (together with
the bulb) by pushing it in.
7-28
EAU43234

Replacing a front turn signal

light bulb

1. Remove the turn signal light bulb
1
1. Turn signal light bulb socket
2. Remove the burnt-out bulb by
3. Insert a new bulb into the socket,
4. Install the socket (together with
socket (together with the bulb) by
turning it counterclockwise.
1
pushing it in and turning it coun-
terclockwise.
push it in, and then turn it clock-
wise until it stops.
the bulb) by turning it clockwise.
EAU52323
7