Handlebar Switches - Yamaha FreeGo LTK125 2019 Owner's Manual

Handlebar switches

Left
1
2
3
1. Dimmer switch " / "
2. Turn signal switch " / "
3. Horn switch " "
Right
1
2
/
1. Hazard switch " "
2. Start switch " "
EAU1234M
Dimmer switch "
Set this switch to "
beam and to "
Turn signal switch "
To signal a right-hand turn, push this
switch to " ". To signal a left-hand
turn, push this switch to "
released, the switch returns to the cen-
ter position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch "
Press this switch to sound the horn.
Start switch " "
With the sidestand up, push this switch
while applying the front or rear brake to
crank the engine with the starter. See
page 6-1 for starting instructions prior
to starting the engine.
Instrument and control functions
EAU12402
/ " Hazard switch " "
" for the high With the main switch in the "ON" posi-
" for the low beam. tion, use this switch to turn on the haz-
ard lights (simultaneous flashing of all
EAU12461 turn signal lights).
/ "
The hazard lights are used in case of an
emergency or to warn other drivers
when your vehicle is stopped where it
". When
might be a traffic hazard.
NOTICE
Do not use the hazard lights for an
extended length of time with the en-
gine not running, otherwise the bat-
EAU12501
"
tery may discharge.
EAU12722
4-6
EAU79500
4
ECA10062