Yamaha FreeGo LTK125 2019 Owner's Manual page 24

Instrument and control functions
a battery voltage meter
Push the "RESET/SELECT" button to
switch the display between the odom-
eter "ODO", the tripmeter "TRIP", the
battery voltage "BAT" in the following
order:
ODO → TRIP → BAT → ODO
4
Odometer mode
1
1. Odometer
The odometer shows the total distance
traveled by the vehicle.
TIP
The odometer will lock at 999999 and
cannot be reset.
Tripmeter mode
1
1. Tripmeter
The tripmeter shows the total distance
traveled since it was last reset.
TIP
The tripmeter will reset and continue
counting after 9999.9 is reached. To
reset the tripmeter, while it is being dis-
played, press the "RESET/SELECT"
button for at least one second.
4-5
The battery voltage meter
1
1. Battery voltage meter
This meter shows the current charge
state of the battery.
Over 12.8 V Full charge
Under 12.7 V Charging is required.
TIP
If the battery voltage is less than 9.0 V,
"_ _._" will be displayed.