Features - KEYKING FPC1000 Series User Manual

KEYKING GROUP

1.4 Features

Scratch resistant 500DPI Fingerprint Sensor

~1 sec. response time.

Multi-Core CPU with multithread operation.

Self-Test, Watchdog Timer for better stability

1,000 fingerprints capacity. Up to 3 fingers / employee.

No fingerprint image stored – fingerprint converted to mathematical template code.

Uninterrupted operation on-line and off-line, independent operation.

TFT color display – customizable background and employee data.

User Friendly interface in English or Chinese

On-Device-Configuration for operation as Stand-Alone

100MBPS Network connectivity

PoE supported

Wiegand 26/34 output, for connection as reader to standard access control controllers.

Wiegand 26/34 input, for secondary reader as exit device. Can be card reader or another

FPC1000 unit.
Exit Button (REX) and Door Sensor inputs

3A Door Relay

AUX Input – programmable, can be used for intercom or alarm operation

AUX Relay – programmable, can be used for alarms or other signaling

IP54 – fit installation in multiple locations.

Specification:
CPU: ARM, 32Bits, Cortex-M4, 400MHz DSP

Fingerprint Template: 1,000

Biometric sensor: 500 dpi 0.5sec. read sensor

Operation Modes: FP, Card, FP / Card, Card+FP, ID+FP – may personalized by employee

Wiegand interface: Wiegand input / output

Networking: TCP/IP 100MBPS – KEYKING Protocol

Power Over Ethernet: IEEE 802.3af (including 12Vdc 500mA output)

Operating voltage: 12VDC

Operating current: ≤500mA

Standby current: ≤350mA

Temperature: -20° C to 65° C

Humidity: 0--95%

Dimension: 197mm L x88mm W x 35mm

Weight: 490g

FPC1000 Biometric Controller User Manual（V1.00）
Page 7 of 43