Setup the ID of Controller....................4 2.2. Connect the TC3XYMT/TC3XYNT to PC directly through RS232......4 2.3. Connect the TC3XYMT controller to PC through IC232 RS232-RS485 .....5 2.4. Connect the TC3XYMT controller to PC through C2000 TCP-RS485 ......5 2.5. Connect the TC3XYNT controller to HUB/Switch............5 Install Sphinx Software ......................6...
TC3XYMT/TC3XYNT Starter Guide (Version 1.04.1) 1. Controller and Reader wiring Print out TC3XYHardwareUserManual.doc. Please refer to the last page of the connection diagram (it is better to view it on the PC display because of the color code). Connect wires of RJ45 cable to wires of reader’s cable. Notice that: •...
2. Connect the controller to PC Based on project and kind of controller you may decide which method to connect controller to PC. There are 3 methods, the TC3XYNT supports RS232/RS485/TCP, the TC3XYMT supports RS232/RS485. 2.1. Setup the ID of Controller There are 8 switches on the top of controller board.
TC3XYMT/TC3XYNT Starter Guide (Version 1.04.1) Plug DB9 connector to a free COM port on your PC 2.3. Connect the TC3XYMT controller to PC through IC232 RS232-RS485 Print out TC3XYHardwareUserManualx.xx.doc (x.xx meaning version). Please refer to the last page of the connection diagram (it is better to view it on the PC display because of the color code).
TC3XYMT/TC3XYNT Starter Guide (Version 1.04.1) Using C2000 Converter Setting Software to search and setup the controller if you are using Win9x. 5. Checking if the connection is correct or not • Run the icon from the desktop or Start Program Sphinx Access Control Software\Sphinx.exe.
Need help?
Do you have a question about the TC3XYMT and is the answer not in the manual?
Questions and answers