KEYKING FPC1000 Series User Manual page 22

KEYKING GROUP
4.2.1.5 User ID+card
1. Press 5 to enter add UserID+Card.
This mode uses Dual-Factor ID, though do not use Fingerprint as one of
the identifications. It is not recommended to use this mode, unless, there
is a specific problem with an individual that can not use Fingerprint.
2. Swipe the card in front of the card picture (under the sensor); system
will enter the next interface after a beep sound .
FPC1000 Biometric Controller User Manual（V1.00）
Page 22 of 43
Keyking FPC1000
1． FP
2． FP/Card
3． FP+CARD
4． UserID+FP
5． User ID+card
Keyking FPC1000
Add Card
Place your card