Table of Contents
Advertisement
KEYKING GROUP
Chapter 5 Operation in Sphinx
5.1 Install driver for BioUSB10
1.
If you use FPC1000 for enrollment, please ignore this step.
2.
Go to your computer C:\program files (86)\keyking\sphinx4 folder and open Drivers folder.
3.
Run the BioUSB10 instalation.
5.2 Select FPC1000 Series
1.
In Sphinx main screen, go to Setup menu and select communication configuration
2.
Select the fingerprint tab
3.
Select " FPC1000 Series".
5.3 Search & Config FPC1000
1.
run the Controller Configuration process as any other controller
2.
To customize the unit, select the fingerprint icon.
5.4 Enrolling finger for user
1.
Enrolling fingerprint through one of FPC1000 in "personnel information / Fingerprint".
2.
Admin User: Setup at least one user as a "Admin", then somebody else can not access the menu to manage
it. If you did not setup any "Admin User", everybody can manage FPC1000 to add user or something else.
FPC1000 Biometric Controller User Manual（V1.00）
Page 41 of 43
Advertisement
Table of Contents
