KEYKING FPC1000 Series User Manual page 19

KEYKING GROUP
4.2.1.1 Fingerprint Only
1. Press 1 for Fingerprint Only
2. Hit ENTER to go to the next screen
Level 1:1 apply to Card+Fingerprint or ID+Fingerprint modes ONLY.
The number represent how strict the verification is done. 4 is normal,
higher number will provide higher security, but, might result in
multiple attempts by authorized users. Lower number will make the
unit faster to response and comply with problematic fingers, but,
might authorize unauthorized persons.
3. Hit ENTER to go to the next screen
If entered 0, the unit will require ID or Card before fingerprint, with 1
(default) the unit will read the finger as it is laid on the sensor.
4. Follow the instructions on the screen, the unit will require two finger
scans, let the unit 2 seconds scan time for each finger.
If scan failed, the FPC1000 will go back to the main menu and the
process will begin from the Main Menu 4.3.1
FPC1000 Biometric Controller User Manual（V1.00）
Page 19 of 43
Keyking FPC1000
1． FP
2． FP/Card
3． FP+CARD
4． UserID+FP
5． User ID+card
Keyking FPC1000
Level 1:1
（0~9）:4
Keyking FPC1000
Enable 1: N
:
（N=0/Y=1）
:
Keyking FPC1000
〈Add FP〉
Put Your FP