Page 1
User Manual Thank you for choosing Keyking products. Please read this manual before using. Model: FPC3002Q QR Code & Biometric Fingerprint Reader KEYKING GROUP...
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) Index Chapter 1 About FPC3002Q ........................4 1.1 Introduction ..........................4 1.2 Model Number .......................... 5 1.3 FPC Family ..........................6 1.4 Features ............................ 7 1.5 Installations instruction ......................8 1.5.1 FPC3002Q works as a reader (Wiegand) ..............
Page 3
5.5.1 Change Company name ....................59 5.5.2 Change BackGround picture ..................60 5.5.3 Choose the FPC3002Q location (Work as terminal) ............ 60 5.5.4 Choose the Unit ID of external OSDP reader (Work as terminal)........ 61 5.5.5 To open the door by Temporary PIN ................62 5.6 Screen Message ........................
• QR Code Reader-Supports QR code scanning, available to visitors; • Proximity (Mifare) card Reader-Supports Proximity & Mifare card; FPC3002Q can be used as Time & Attendance terminal except access control functions. The IPS screen can be customized and show the employee’s name when authorized.
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) FPC3002Q may be installed as Entry device or IN/OUT system where the FPC3002Q is used for entry and for exit, an attached Exit Button or Card Reader or additional FPC3002Q are connected.
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) Compatible with these types card: P: 125KHz (LF): EM4100, TK4100, HID1326, 1386, AWID, KK234\250T; and others U: 13.56MHz (HF): KK1208 M1, Philips S50, Mifare-1 Compatible and others P models Supports Multi Wiegand Output: ✓...
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) 1.4 Features sensor, Live fingerprint check, high security; Capacitive ⚫ Page 7 of 68...
Dimension: 161mm L x66mm W x 25mm ⚫ Weight: 490g ⚫ 1.5 Installations instruction 1.5.1 FPC3002Q works as a reader (Wiegand) We suggest to use a separated power supply for FPC3002Q because it requires minimum 500 mA power supply. Page 8 of 68...
Page 9
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) Page 9 of 68...
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) 1.5.2 FPC3002Q works as a reader (OSDP) 1.5.3 FPC3002Q works as a standalone 3 options: ⚫ Standalone, no external reader Page 10 of 68...
Page 11
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) Notes: Recommended power supply PSRFS1240 – incorporate isolation relay and backup battery support. Page 11 of 68...
Mount the back plate on the American electric box by 2 pcs M4 screws. Please refer to picture 2. ⚫ Connect all wires to FPC3002Q. ⚫ Fix FPC3002Q on the back plate. Please refer to picture 3. ⚫ Fasten the fixed screw from the bottom. Please refer to picture 4. Figure 2-1 American electric standard installation 2.2 Europe standard Installation...
Page 14
FPC3002Q Biometric & QR Code reader User Manual (V1.00) picture 3. ⚫ Connect all wires to FPC3002Q. ⚫ Fix FPC3002Q on the back plate. Please refer to picture 4. ⚫ Fasten the fixed screw from the bottom. Please refer to picture 5. Figure 2-1 Europe...
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) Chapter 3 Wiring Diagram 3.1 FPC3002Q Parts Logo Date & Time Background picture Card Area Keypad Fingerprint Sensor QRCode Reader Figure 3-1 LED: BLUE = Power GREEN = Lock Open...
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) 3.2 Wiring Diagram Label Definition TCP/IP Network TCP/IP or PoE Power to the external reader 12Vdc, 485+ OSDP Input/Output 485- Wiegand Output COM1 Door Lock Relay AUX Programmable Relay – Also act COM2 as Alarm and “Alarm Clock”...
May be connected via the PSRFS1240 – in such case, do not use Door Sensor to prevent false alarms from the unit. Or direct to the FPC3002Q using GND & SEN connections. If connected directly to FPC3002Q, the opening operation will be recorded on the software.
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) 3.4 TCP/IP Network FPC3002Q TCP/IP network Figure 3-8 TCP/IP crystal head RJ45 NO. Definition Figure 3-9 Figure 3-2 3.5 Work Mode 3.5.1 Work as Wiegand reader. Wiring stpes: Connect network cable to the RJ45 of TA3002.
Page 19
FPC3002Q Biometric & QR Code reader User Manual (V1.00) Black Note: ⚫ If network cable can provide power to FPC3002Q through POE, please do not connect 12VDC to FPC3002Q from access controller. The access control software directly connects to FPC3000 device interface configuration, click Setup/Hardware/Fingerprint Reader/FPC3000:...
Yellow RS485+ Note: ⚫ If network cable can provide power to FPC3002Q through POE, please do not connect 12VDC to FPC3002Q from access controller. The access control software directly connects to FPC3002 device interface configuration, click Setup/Hardware/Fingerprint Reader/FPC3000: Page 20 of 68...
Page 21
FPC3002Q Biometric & QR Code reader User Manual (V1.00) 3.5.2.2 Keypad Message When FPC3002Q work as an osdp reader, it will output the Keypad value to Access Controller through OSDP socket & Wiegand socket. OSDP socket: It will output the Keypad value only when FPC3002Q work as an OSDP reader.
⚫ Only when you use a small current required strike, the relay of FPC3002Q can control the strike. The access control software directly connects to FPC3002 device interface configuration, click Setup/Hardware/Fingerprint Reader/FPC3000:...
Page 23
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) Page 23 of 68...
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) Chapter 4 Configuration Menu Below is the full configuration menu. New units do not have Administrator and will allow entering the menu without password or 1234. After first Administrator is enrolled, to enter the menu, the unit will require Administrator ID.
FPC3002Q Biometric & QR Code reader User Manual (V1.00) 4.1 User Management 4.1.1 Add Personnel / Admin 1. Press Menu to enter management menu when FPC3002Q is idle. Keyking FPC3002Q Esc works as cancel while Enter works as confirm. 1. User 2.
Page 26
4. Follow the instructions on the screen, the unit will require three finger scans, let the unit 2 seconds scan time for each finger. If scan failed, the FPC3002Q will go back to the main menu and the process will begin from the Main Menu 4.2.1...
Page 27
5. Follow the instructions on the screen, the unit will require three finger scans, let the unit 2 seconds scan time for each finger. If scan failed, the FPC3002Q will go back to the main menu and the process will begin from Main Menu 4.2.1...
Page 28
4. Follow the instructions on the screen, the unit will require three Add FingerPrint finger scans, let the unit 2 seconds scan time for each finger. If scan failed, the FPC3002Q will go back to the main menu and Put Your FP the process will begin from Main Menu 4.2.1 4.2.1.4 Card+FP...
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) Keyking FPC3002Q 4.2.1.5 Card +PIN 1. FP 2. FP|Card 1. Press 5 to enter add Card +PIN. 3. FP+PIN This mode uses Dual-Factor ID, though do not use Fingerprint as 4....
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) Keyking FPC3002Q 1. User 2. Press 5 to enter Delete All interface. 2. Network 3. Option 4. Device 5. Terminal Info 3. Press 1 and Enter to confirm deleting.
If using Lap Top for updates from time to time, make sure the laptop has “static ip” also so the FPC3002Q will automatically recognize it when connected. Single laptop can be used to configure multiple FPC3002Q units. See SPHINX manual for more information.
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) 4.2.2 IP Option Keyking FPC3002Q 1. User 2. Network 1. From the Main Menu, select 2. Network 3. Option 4. Device 5. Terminal Info Keyking FPC3002Q 1. Terminal ID 2....
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) 4.2.3 IP Address 1. From the Main Menu, select 2. Network Keyking FPC3002Q 1. User 2. Network 3. Option 4. Device 5. Terminal Info 2. Press 3 to enter IP Address Keyking FPC3002Q 1....
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) 4.2.4 Subnet Mask 1. From the Main Menu, select 2. Network Keyking FPC3002Q 1. User 2. Network 3. Option 4. Device 5. Terminal Info 2. Press 4 to enter Subnet Mask Keyking FPC3002Q 1....
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) 4.2.5 Gateway 1. From the Main Menu, select 2. Network Keyking FPC3002Q 1. User 2. Network 3. Option 4. Device 5. Terminal Info 2. Press 5 to enter Subnet Mask Keyking FPC3002Q 1....
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) 4.2.6 Host IP The HOST is the computer where the SPHINX software is installed (Server). 1. In Main Menu select 2, Network Keyking FPC3002Q 1. User 2. Network 3. Option 4.
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) 4.2.7 Host Port 1. In Main Menu select 2, Network Keyking FPC3002Q 1. User 2. Network 3. Option 4. Device 5. Terminal Info 2. Select 7, Host Port Keyking FPC3002Q 1....
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) 4.3 Option Keyking FPC3002Q 1. Language 2. Clock 4.3.1 Language 3. Screen Saver 4. Door Relay 1. In Main Menu, select 3, Option 5. Tamper Alarm 6. Work Mode Keyking FPC3002Q 1.
Page 39
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) 1. In the Option Menu, select 3, Screen Saver Keyking FPC3002Q Screen Saver(Sec): 010 2.Enter the time in Seconds and ENTER to confirm Page 39 of 68...
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) 4.3.4 Door Relay Door Relay time is the time the lock will be open on authorized access (by ID or REX Button or from the software “Grant Access”). Make sure it is a reasonable time. Too short, people will not be able to enter.
FPC3002Q Biometric & QR Code reader User Manual (V1.00) 4.3.5 Tamper Alarm FPC3002Q has internal Tamper Switch alerting if the unit is being removed from its mounting bracket. If enabled, removal from the mounting will cause the unit to Keyking FPC3002Q beep continuously and can also be used to activate alarms using Relay 1....
Level(3-9): 5 4.4.2 Wiegand Setting Use this setting if connecting the FPC3002Q as Fingerprint Reader to a Door Controller using Wiegand Protocol. This type of connection provides higher security operation where the door is controlled from another controller located in the secured area.
Page 43
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) 1. From the Device Menu, select 2, WG Setting. Keyking FPC3002Q 1. FP Level 2.Select the option 2. Wiegand Setting 3. Card Number Mode 4. Display Mode 5. Terminal Initial...
FPC3002Q Biometric & QR Code reader User Manual (V1.00) 4.4.3 Card Number Mode Card Number Mode set the display of the card number on the screen (Display Mode 4-7) . It does not affect the operation of the FPC3002Q and it’s Weigand Input/Output Keyking FPC3002Q 1. FP-Module 2....
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) 4.4.5 Terminal Initial Keyking FPC3002Q 1. FP -evel Keyking FPC3002Q 2. Wiegand Setting 1. Parameter Initial 3. Card Number Mode 1. From Device Menu, select 5, Terminal Init 2. Delete All Logs 4....
Page 46
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) Press Down Button to page down to view other information. Keyking FPC3002Q Unit ID=0001 Version=V3.03 User Capacity=30,000 FP Capacity=3000 Log Capacity=100,000 MAC=00-10-F0-01-60-74 IP=192.168.X.X Gateway=192.168.2.249 Mask=255.255.0.0 Host IP=192.168.2.18 Host Port=8000...
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) 4.6 Quick Operation on terminal 4.1.1. click the MENU button to enter the main menu. 4.1.2. select Options and set the Clock (Date-Time YYYYMMDDHHMMSS) 4.1.3. in Options, set Door Relay 4.1.3.1.
Run the BioUSB-SC03 installation. 5.2 Select FPC3002Q Series Before you use FPC3002Q, please check the Sphinx version, and make sure the version is after V4.4.2.33. 1. Go to Setup menu and select communication configuration from Sphinx main screen. 2. Select the “Fingerprint”, and choose "FPC3000 Series".
Once you find a lots, just highlight the one you would like to configure. Input the IP, Host IP and so on to configure it. Click ok, to go back TCP/IP setting. Click Exit to go back Search and Upload Controller, choose the FPC3002Q, and click Save to save it into database. Done.
Page 50
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) Setup Unit ID: The default Unit ID is 1. If you would change it, please input the Unit ID you would like to put, and click “Ok” to make change.
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) The unit ID should be matched with Reader/door number of Access controller. For example: Keyking DPU3048-OS (4 doors, 8 readers). Unit ID DPU3048-OS Wiegand Reader (OSDP) Access Controller Door 1#...
Page 52
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) Setup the Unit ID, and click Change to confirm. Change Unit ID: Input the Unit ID you would like to put, and click “Change” to make change. Page 52 of 68...
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) 5.4 Configure FPC3002Q 5.4.1 Parameter Proximity Card Reader: ⚫ “Disable”, will disable proximity card, and will support Mifare card only. ⚫ “Enable”, will support Mifare and Proximity card. Disable is the default option, because once the proximity reader was enable, it will require more current for FPC3002Q, and FPC3002 will be hotter.
Page 54
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) Active QR Code Light: “Never”, the light will be always off; “Object Close to”, lights up when an object approaches; “Always”, the light will be always on. Super PIN: “Super PIN” is the password to open this door, you can put any 8 digitals.
Page 55
FPC3002Q Biometric & QR Code reader User Manual (V1.00) Menu PIN: “Menu PIN” is the password to manage FPC3002Q, which is as same as “Admin User”. If there is no any “Admin User” or “Menu PIN”, anybody can manage FPC3002Q through Keypads.
FPC3002Q Biometric & QR Code reader User Manual (V1.00) 5.4.2 Status Schecule When FPC3002Q work as a standalone/Terminal, you can setup the Status Schedule. For example, 8:00 am is the time for work, and we can keep the door always open for every employee, and the door will be closed from 8:30.
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) 5.4.3 Door Access Schedule 5.4.4 Fingerprint User Of course, you can refer to the manual of Sphinx. 5.4.5 Flow Control You can refer to the manual of Sphinx. 5.4.6 Events Drive You can refer to the manual of Sphinx.
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) 5.4.9 Channel Mapping You can refer to the manual of Sphinx. 5.4 Enrolling finger for user FPC3002Q Enrolling fingerprint through one of in "personnel information / Fingerprint". Choose the enroll device: Enroller BioUSB-SC03 or any FPC3000 terminal when it is working as an Enroller.
Picture must be Tamper Alarm 320x160 and bmp format 5.5.1 Change Company name Type the company name you would like to use, like “KEYKING”, then click “Apply”. Company Name: Welcome to Use! Choose a picture to replace Keyking Page 59 of 68...
Option 1: Card reader (OSDP Only) is inside of the door, and Outside Inside OSDP Reader FPC3002Q ⚫ When the FPC3002Q is installed outside the door as below picture, please choose “Entry”, and click “Apply”. FPC3002Q installed on the entry of door. Outside OSDP reader...
Outside OSDP reader Inside FPC3002Q When the FPC3002Q is installed outside the door as below picture, please choose “Entry”, and click “Apply”. In case of this, the external OSDP reader become “Outside” automatically. FPC3002Q installed on the exit of door.
When the FPC3002Q is installed outside the door, we need choose “Entry”, then you will see “OSDP Reader (inside)”, and please choose the Unit ID of the OSDP reader which is installed on the inside of the door.
Page 63
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) Temporary PIN: ⚫ Temporary PIN will be valid in 5 minutes, and can be used repeatedlly. ⚫ Temporary PIN will be created by “Super PIN”. Steps to make Temporary PIN: ⚫...
Page 64
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) Page 64 of 68...
KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00) Chapter 6 FAQ Descriptions Possible Reason Solution ⚫ ⚫ No lights, not responding Power problem ⚫ Check power supply ⚫ ⚫ Lights are ON, card swipe Card technology not ⚫...