Siemens SIMATIC S7-400 Hardware And Installation Manual page 7

Additional Assistance
If you have any questions regarding the products described in these manuals and
cannot find an answer in the paper documentation or in the online help, please
contact the Siemens representative in your area. You will find a list of addresses in
the Appendix entitled "Siemens Worldwide" at the end of this manual.
If you have any questions or comments on this manual, please fill out the remarks
form at the end of the manual and return it to the address shown on the form. We
would be grateful if you could also take the time to give us your personal opinion of
the manual.
Siemens also offers a number of training courses to introduce you to the
SIMATIC S7 automation system. Please contact your regional training center or
the central training center in Nuremberg, Germany for details: D-90327
Nuremberg, Tel. (+49) 911 / 895 3154.
Up-To-Date Information
You can find up-to-date information on SIMATIC products from the following
sources:
On the Internet under http://www.ad.siemens.de/
In addition, the SIMATIC Customer Support provides up-to-date information and
download facilities for users of SIMATIC products:
On Internet under http://www.ad.siemens.de/simatic.cs
Via SIMATIC Customer Support Mailbox under the following number
+49 (911) 895-7100
For dialing into the mailbox use a modem of up to V.34 (28.8 Kbps) and set the
following parameters: 8, N, 1, ANSI, or alternatively use ISDN (x. 75, 64 Kbps).
You can reach the SIMATIC Customer Support by phone using the number
(+49) (911) 895-7000 and by fax using (+49) (911) 895-7002. You can also send
enquiries by e-mail on the Internet or by mail to the above mailbox.
S7-400 and M7-400 Programmable Controllers, Installation Manual
C79000-G7076-C424-01
www.gkbpx.com
Preface
vii