Carrier Touch Pilot Control Series Control Manual page 19

7 - DETAILED MENU STRUCTURE
Modes Menu – MODES
No. Name Status
1 m_delay no/yes
2 m_2stpt no/yes
3 m_reset no/yes
4 m_demlim no/yes
5 m_MaxCon no/yes
6 m_MinCoo no/yes
7 m_ramp_l no/yes
8 m_pmpper no/yes
9 m_night no/yes
10 m_slave no/yes
11 m_cpmppr no/yes
12 m_ice no/yes
*Displayed in English by default.
Pump Status Menu – PUMPSTAT
No. Name Status
1 SET_FLOW no/yes
2 CPUMP_1 off/on
3 FLOW_SW open/close
4 HPUMP_1 off/on
5 CONDFLOW open/close
*Displayed in English by default.
Miscellaneous Status Menu – MSC_STAT
No. Name Status
1 m_ecopmp no/yes
*Displayed in English by default.
Run Times Menu – RUNTIME
No. Name Status
1 HR_MACH -
2 st_mach -
3 hr_cpa1 -
4 st_cpa1 -
5 hr_cpa2 -
6 st_cpa2 -
7 hr_cpb1 -
8 st_cpb1 -
9 hr_cpb2 -
10 st_cpb2 -
11 hr_cpum1 -
12 hr_hpum1 -
*Displayed in English by default.
Default Unit Displayed text *
no - Start Up Delay In Effect
no - Second Setpoint In Use
no - Reset In Effect
no - Demand limit active
no - Maximum Condens. Limit Maximum condensing limitation active
no - Minimum Cooling Limit
no - Ramp Limit reached
no - Pump Periodic Start
no - Night Low Noise Active
no - Master Slave Active
no - Cond Pump Periodic Start Periodic condenser pump start-up
no - Ice Mode In Effect
Default Unit Displayed text *
no - Cooler Flow Setpoint Out Evaporator flow setpoint output
off - Cooler Pump #1 Command Evaporator pump control command
open - Cooler Flow Switch
off - Condenser Pump
Command1
open - Condenser Flow Status
Default Unit Displayed text *
no - Eco Pump Mode Active
Default Unit Displayed text *
- hour Machine Operating Hours Unit operating hours
- - Machine Starts Number
- hour Compressor A1 Hours
- - Compressor A1 Starts
- hour Compressor A2 Hours
- - Compressor A2 Starts
- hour Compressor B1 Hours
- - Compressor B1 Starts
- hour Compressor B2 Hours
- - Compressor B2 Starts
- hour Cooler Pump #1 Hours
- hour Condenser Pump #1
Hours
Description
Start-up delay in effect
Second setpoint in use
Setpoint reset active
Demand limit active
Maximum cooling limitation active
Capacity is limited by ramp logic
Periodic cooler pump start-up
Night mode active
Master/slave active
Ice storage mode active
Description
Cooler flow switch
Condenser pump control command
Condenser flow switch
Description
Eco pump mode active (see section 8.8.3)
Description
Number of unit starts
Operating hours, compressor A1
Number of starts, compressor A1
Operating hours, compressor A2
Number of starts, compressor A2
Operating hours, compressor B1
Number of starts, compressor B1
Operating hours, compressor B2
Number of starts, compressor B2
Operating hours, evaporator pump
Operating hours, condenser pump
19