Explanation Of Warning Signs And Notes; Notes On Electrical And Pneumatic Safety; Proper Use - ABB TZID-C110 Short Manual

1.2 Explanation of warning signs and notes

Important information has been marked and emphasized with the following symbols in
these operating instructions:
This symbol is printed next to warnings indicating a direct endangerment of a
person's health or life. Also, major property damage may occur.
Warning
If the safety notes marked with this symbol are not observed, minor personal
injuries and property damage may result.
Caution
This symbol is printed next to notes containing important informationen pertai-
ning to your TZID-C110 or its operation.

1.3 Notes on electrical and pneumatic safety

• Only qualified persons may mount, electrically and pneumatically connect,
and commission the TZID-C110 positioner.
Warning
• Ensure the electrical safety of all feeding devices.
• When connecting the electrical wiring, observe the specifications according
to chapter 4 "Technical data".
• For the electrical installation of ex-protected devices, observe all national
regulations, DIN/VDE directives, especially VDE 0165, the directives for
explosion protection, and the specifications in the EC type examination cer-
tificates (see chapter "Certificates" on page 29 of this manual).
• Do not use the internal communication interfaces LKS or X5 on the printed
circuit board if the positioner is installed in the hazardous area.
• Observe the safety instructions of the pneumatic actuators when mounting
and commissioning the devices. There is danger of injuries due to the high
displacement forces of the actuators.

1.4 Proper use

The TZID-C110 positioner is an electro-pneumatic valve positioner for use with pneu-
matic linear and rotary actuators.
The device may only be used for the applications listed in these operating instructions
and in the relevant data sheet (if available).
2 Safety and precautions
Safety and precautions
41/18-77 EN