Huawei UPS5000 User Manual page 24

UPS5000-(200 kVA-800 kVA) Top Air-flow Cabinet
User Manual
Procedure
Step 1 Remove the rear cover from the UPS, as shown in
Step 2 Remove the rear cover fasteners, as shown in
Step 3 Install connection mechanical parts at the leftmost and rightmost anchors of the UPS. The
following figure takes a 400 kVA UPS as an example.
Figure 3-10 Installing the conversion mechanical parts
Step 4 Remove the side panel from the top air-flow cabinet.
Issue Draft A (2016-12-09)
The top air-flow cabinet is 350 mm deep.
If there is only one securing hole for the conversion mechanical part, install it on the lowest hole of the
UPS leveling foot.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 3-1.
Figure 3-2.
3 Product Installation
19