Bissell POWERFORCE HELIX TURBO REWIND 1797 Series User Manual page 8

Emptying the Dirt Tank
1
Cleaning the Pre-Motor Filter
1
Cleaning the Post-Motor Filter
1
With Dirt Tank removed, press
filter cover release button to
access Post-Motor Filter.
WARNING
To reduce the risk of electrical shock, turn power OFF and disconnect polarized plug from
electrical outlet before performing maintenance or troubleshooting checks.
WARNING
Do not operate the vacuum with damp or wet filters, without filters in place or with the Dirt
Tank missing. Allow components to dry before reassembling the Dirt Tank.
8
www.BISSELL.com
Press the Tank Release
Button and pull handle
to lift Dirt Tank away
from vacuum.
2
Press
the Tank
Release
Button
and pull
handle to
lift Dirt Tank
away from
vacuum.
2
Open the
Dirt Tank lid
by lifting the
release latch
on the front.
2
Holding Dirt Tank
over a trash bin,
press release
button on back to
open tank bottom
and dump the
debris.
Snap bottom
back into place
when empty.
3
Remove the Pre-
Motor Filter by
pulling it from the
tank lid. Clean
it with warm
water. Allow to
completely dry
before returning
it to the Dirt Tank
lid.
Clean all filters with
mild detergent, rinse
and squeeze all excess
water. Allow filters to
dry completely before
reinserting.