Assembly - Bissell POWERFORCE HELIX TURBO REWIND 1797 Series User Manual

Assembly

WARNING
Do not plug in your vacuum until you are familiar with all instructions and operating
procedures.
1
Place the Upper
Handle onto the
base and push
it down. Then
attach the handle
with the 2 screws
that are taped to
the handle in a
plastic bag.
4
Now wrap the
hose through
the Hose Clip
and connect
the hose wand
to the Foot
Hose down at
the bottom of
the vacuum.
7
Remove filter in unit and
replace with Febreze
filter. Return Dirt Tank to
vacuum.
NOTE: The Febreze filter must first be removed from the bag before inserting it
into the machine.
NOTE: The Crevice Tool can be found inside the Extension Wand. You can remove
it to use it and put it back to store it neatly out of your way when you're finished.
Certain trademarks used under license from The Procter & Gamble Company or its affiliates.
2
Next, insert the wand
base and turn it to the
left to lock it into place.
5
This unit includes
a Febreze filter. To
replace the filter, press
the Tank Release
Button and pull handle
to lift Dirt Tank away
from vacuum.
Put your accessory tools on the
vacuum and you're ready to go!
Extension Wand
(with Crevice Tool inside)
3
Next, insert the end of
the hose into the back of
the vacuum and twist to
lock it into place.
6
Open the
Dirt Tank lid
by lifting the
release latch
on the front.
Dusting TurboBrush®
Brush
www.BISSELL.com
Tool
5