Maintenance & Care - Bissell POWERFORCE HELIX TURBO REWIND 1797 Series User Manual

Using the Height Adjustment
Using the Specialized Tools
Dusting Brush
Your new PowerForce® Helix™ Turbo Plus
vacuum not only does a great job on your
floors, it also comes with a complete set
of accessory tools to make your above
floor cleaning jobs easier. Just put your
Maintaining the TurboBrush® Tool
1
Align
Slot
Twist gray collar counter-
clockwise, until slot
appears then separate
faceplate. Carefully
remove brush, replace
belt and brush if needed.
Extension Wand
2
Paddle Wheel
If paddle wheel gets
dislodged, align the two
clips on each side and
pop into place.
You can easily raise or lower your vacuum to
adjust to different flooring types. Simply turn
the knob towards the desired flooring type. If
your vacuum becomes too difficult to push,
just move to a higher setting.
Crevice Tool
vacuum in the upright position, pick
the accessory tool that best fits your
needs and attach it to the end of your
hose. You're ready to clean base boards,
curtains, upholstery and much more.
Roller
Belt
TurboBrush® Tool
3
The faceplate will not
close properly if all
parts are not aligned
correctly.
www.BISSELL.com
7