auna 10033002 Manual page 27

Sleep Set
Press "Previous" or "Next" button to select "Off/120/90/60/45/30/15/5",
then press "Enter" button to confirm.
Factory Reset
Press "Previous" or "Next" button to select "Yes" or "No", then press "Enter"
button to confirm.
Syetem Version
Press the "Enter" button, then you can check the version number.
FM Scan set
Press "Previous" or "Next" button to select "Only" or "All", then press
"Enter" button to confirm.
Note: Press "Menu" button, then you can go back to the menu setting
quickly.
FM Scan setting
Press "Mode" button to switch to "FM" mode. The first time you do this, the
FM frequency "87.5" will be displayed on the screen.
Fully extend the antenna.
To tune a specific frequency manually
Press "Previous" or "Next" button multiple times to scroll through.
To auto scan
Press and hold the "Previous" or "Next" for a few seconds, then release. Unit
will then start scanning up the frequency band and play the station with
best signal.
EN
27