Hochiki FireNET L@titude Series Information Manual page 16

The diagram below shows power and network connections when powered from an adjacent L@titude panel. In
this scenario, no PF is required. Power is supervised by the L@titude panel. Do not insert more than one
conductor per terminal. Use wire nuts or other suitable splice connectors to connect the 24V DC cables to both
the AUX 24V OUT and RTN terminals.
Hochiki America Corporation
FireNET L@titude Network Vision Annunciator Information
Guide
Version 1.03 | May 2019 | MAN-1434HA
Installation
Page 16