Mounting The Vision Annunciator - Hochiki FireNET L@titude Series Information Manual

Mounting the Vision Annunciator

1. Open the enclosure by removing the screw located at the top. The fascia hinges downwards. Remove the
fascia by disconnecting the ground and removing the hinge pins.
2. Using the enclosure as a template, mark the position of the holes.
3. Mount the enclosure using appropriate hardware.
Hochiki America Corporation
FireNET L@titude Network Vision Annunciator Information
Guide
Version 1.03 | May 2019 | MAN-1434HA
Installation
Page 12