Related Manuals for Hochiki FireNET L@titude Series
Summary of Contents for Hochiki FireNET L@titude Series
- Page 1 FireNET L@titude Network Vision Annunciator Information Guide Version 1.03 | May 2019 | MAN-1434HA...
-
Page 2: Table Of Contents
Return Material Authorization (RMA) Warranty Service Advanced Replacements Overview Fascia Internal Components Installation Before You Begin Mounting the Vision Annunciator Trim Ring Wiring Specifications Cabling Index Hochiki America Corporation Version 1.03 | May 2019 | MAN-1434HA FireNET L@titude Network Vision Annunciator Information Page 2 Guide... -
Page 3: Compliance
Any changes or modifications not expressly approved by Hochiki America Corporation could void the user's authority to operate this equipment under the rules and regulations of the FCC. -
Page 4: Introduction
Introduction INTRODUCTION Technical Support For technical support, contact Hochiki America at 800.845.6692 or technicalsupport@hochiki.com. Hochiki technical support is available Monday through Friday, 7:00AM to 5:00PM, PST. Prior to contacting technical support, have the following information available: Product part number Purchase order or order number... -
Page 5: Warranty Service
Products returned using the advanced replacement process must be received within 30 days of the RMA issue date. Hochiki America Corporation Version 1.03 | May 2019 | MAN-1434HA FireNET L@titude Network Vision Annunciator Information... -
Page 6: Overview
FireNET L@titude Fire Alarm Control Panels connected to the same network. The Annunciator connects via the network interface, and any number of repeaters can be connected up to the maximum number of nodes allowed by the network. Hochiki America Corporation Version 1.03 | May 2019 | MAN-1434HA FireNET L@titude Network Vision Annunciator Information... - Page 7 The Annunciator can be configured to display events from any combination of nodes on the network. Hochiki America Corporation Version 1.03 | May 2019 | MAN-1434HA FireNET L@titude Network Vision Annunciator Information...
-
Page 8: Fascia
Overview Fascia Hochiki America Corporation Version 1.03 | May 2019 | MAN-1434HA FireNET L@titude Network Vision Annunciator Information Page 8 Guide... -
Page 9: Internal Components
Overview Internal Components Hochiki America Corporation Version 1.03 | May 2019 | MAN-1434HA FireNET L@titude Network Vision Annunciator Information Page 9 Guide... -
Page 10: Installation
Acquire the following item(s) that are not included, but may be required for installation: Hochiki America Corporation Version 1.03 | May 2019 | MAN-1434HA FireNET L@titude Network Vision Annunciator Information... - Page 11 Mounting Hardware - Without Optional Trim Ring: 4 #10 screws, appropriate for mounting location With Optional Trim Ring: 4 M4 x 8mm machine screws and 4 M4 plain washers Hochiki America Corporation Version 1.03 | May 2019 | MAN-1434HA FireNET L@titude Network Vision Annunciator Information...
-
Page 12: Mounting The Vision Annunciator
2. Using the enclosure as a template, mark the position of the holes. 3. Mount the enclosure using appropriate hardware. Hochiki America Corporation Version 1.03 | May 2019 | MAN-1434HA FireNET L@titude Network Vision Annunciator Information... -
Page 13: Trim Ring
The optional trim ring allows a semi-flush mounting of the surface enclosure back box. The diagram below shows the trim ring external and advised wall cut-out dimensions. Hochiki America Corporation Version 1.03 | May 2019 | MAN-1434HA FireNET L@titude Network Vision Annunciator Information... - Page 14 Trim Ring Fitting Options Trim Ring Fold Tabs Use four, M4 x 8mm machine screws and M4 plain washers to mount the enclosure to the trim ring. Hochiki America Corporation Version 1.03 | May 2019 | MAN-1434HA FireNET L@titude Network Vision Annunciator Information...
-
Page 15: Wiring
Installation Wiring The diagram below shows power and network connections when using a dedicated power supply. Hochiki America Corporation Version 1.03 | May 2019 | MAN-1434HA FireNET L@titude Network Vision Annunciator Information Page 15 Guide... - Page 16 PF is required. Power is supervised by the L@titude panel. Do not insert more than one conductor per terminal. Use wire nuts or other suitable splice connectors to connect the 24V DC cables to both the AUX 24V OUT and RTN terminals. Hochiki America Corporation Version 1.03 | May 2019 | MAN-1434HA FireNET L@titude Network Vision Annunciator Information...
- Page 17 Installation The diagram below shows an example network wiring scheme featuring two panels and two annunciators. Hochiki America Corporation Version 1.03 | May 2019 | MAN-1434HA FireNET L@titude Network Vision Annunciator Information Page 17 Guide...
-
Page 18: Specifications
Gray (BS 00 A 05) Black (RAL9005) Weight 4.4 lbs (2 kg) maximum Environmental Temperature Range 23°F (-5°C) - 120°F (49°C) Relative Humidity Up to 95%, non-condensing Hochiki America Corporation Version 1.03 | May 2019 | MAN-1434HA FireNET L@titude Network Vision Annunciator Information Page 18 Guide... -
Page 19: Cabling
The length of CABLE C + CABLE D cannot exceed 3900 feet (1200 meters). The length of CABLE D + CABLE A cannot exceed 3900 feet (1200 meters). Hochiki America Corporation Version 1.03 | May 2019 | MAN-1434HA FireNET L@titude Network Vision Annunciator Information... -
Page 20: Index
18 AWG 18 24V 16, 18 AUX 24V 16 Buzzer 18 Cabling 18 Class A 3 Fascia 8, 10 Network 6, 10, 18 Terminals 16 Hochiki America Corporation Version 1.03 | May 2019 | MAN-1434HA FireNET L@titude Network Vision Annunciator Information Page 20 Guide...