To pause, restart, and stop the Snow activity measurement
operation
While the
"Auto
1. At the end of a Snow run, display the Activity
measurement in progress screen and press the upper
button to pause measurement.
This displays the Snow run result screen, with the route of your Snow
●
run shown on a map.
When starting the next Snow run, press the upper button to restart the
●
Activity measurement operation.
2. To stop an Activity measurement operation, display the
Snow run result screen and then tap the lower button.
This displays a "Save history?" message.
●
3. To save the history, tap "Save". To discard the data, tap
"Discard".
Tapping "Save" displays the Stats screen after the save operation is
●
complete. Tapping "Discard" will return to the "START" screen.
While the
"Auto
The watch detects when your movement has stopped and automatically
●
pauses Activity measurement, which causes the measurement paused
screen to appear. The Activity measurement will restart automatically when
the watch detects that you have started your activity again.
To stop an Activity measurement operation, press the upper button while
●
the measurement paused screen is displayed. This will display the Snow
run result screen. Perform the steps of the procedure from step 2 above.
Record" setting is "OFF"
Record" setting is "ON"
EN-65