Barometric Pressure Calibration (Wf/Tl/Ac); Centered Value / My Graph (Tl) - Casio WSD-F21HR User Manual

Barometric Pressure Calibration (WF/TL/AC)

Operation
Tapping this setting item displays a barometric pressure input screen. Input
the current barometric pressure as measured by another accurate barometer.
Tap the digit of the value that you want to change, and then use
●
to change it.
To reset a manual calibration and display barometric pressure readings
●
based on pressure sensor measurements, tap C.
Description
Though the pressure sensor built into the watch is adjusted at the factory and
normally does not require calibration, you can perform the calibration
operation above if you notice that readings are very different from those from
other sources. To calibrate manually, use this item to input the current
barometric pressure as measured by another accurate barometer.

Centered value / My Graph (TL)

Operation
Tap this setting item and then scroll the list that appears upwards and
downwards. When the type of value you want shown in the center of the My
Graph Screen is displayed, tap it.
Description
This setting changes the type of value displayed in the center of the My Graph
Screen.
EN-86
and