Advertisement
Quick Links
Advertisement
Related Manuals for Sinbo SVC 3493
Summary of Contents for Sinbo SVC 3493
- Page 1 SVC 3493 MULTI-CYCLONE VACUUM CLEANER INSTRUCTION MANUAL www.sinbo.com...
- Page 2 - 1 -...
-
Page 3: Important Safeguards
ENGLISH SINBO SVC 3493 MULTI-CYCLONE VACUUM CLEANER INSTRUCTION MANUAL INTRODUCTION This product adopts the most advanced filtration system, which has no loss of suction and dust, and the effect of multilevel filtering is superior to the traditional filtering system. Dust collection efficiency is lasting and stability when using. -
Page 4: Parts Description
SAVE THIS INSTRUCTIONS! THE UNIT IS INTENDED FOR HOUSEHOLD USE ONLY, ITS COMMERCIAL USAGE AND USAGE IN PRODUCTION AREAS AND WORK SPACES IS PROHIBITED. FEATURES • 5m power cord • Dust capacity 2.5L • Multi-Cyclone structure • Big wheel with soft rubber for protection •... - Page 5 Attention: In the process of handling the machine may not be pushing the dust cup lock, in case the machine is out off and being injured. Hose install 1. Install the hose, please on the dust bucket inlet insert to the end, main straws, clockwise until then pull the hose confirm whether to lock up 2.
- Page 6 in order to prevent scratching the floor (figure 1) 2. When clean carpet, pedal switch, please make the brush bar hidden (figure. 2) 3. To brush a joint, can be directly hung on the rear of the fuselage brush to hang on the shelf.
- Page 7 4. Close the dust bottom cover Basic operation 1. To pull the power cord from the back of the vacuum cleaner, and insert the plug into the socket (according to your need to pull out the power lines, but no more than the power cord in red and yellow mark.
- Page 8 fuselage, collect all the attachments. Cleaning Filter System You will make the filtration system clean up after every using, cleaning up by following steps. Close the vacuum cleaner power, unplug the power plug. Holding the handle, press the dust cup release button, mention the dust cup, and you can take out of the dust cup.
- Page 9 2. Open the top dust tank cover and take out the round heap, cleaning the round heap by water. In order to ensure the heap can use again, you must use it after the heap cleaned to dry. 3. Hold the dust cup, rotating the dust cover in anti-clockwise direction, make the dust barrel printing mark and lock mark in the same place, remove the dust barrel cover, cleaning by water, take out the secondary filter and the first filter in the dust tank to clean.
- Page 10 Cleaning the body of the vacuum cleaner a) All of the daily maintenance and maintenance work should be carried out after the vacuum cleaner power plug pulled out. b) Always clean up garbage of dust tank, in order to avoid vacuum cleaners fail c) Vacuum surface can't scrub with gas or oil synthesis, application of water or neutral detergent scrub, scrub clean cloth must twist dry, don’t make water seeping into the vacuum electrical components.
- Page 20 - 19 -...
- Page 21 01-2019 - 20 -...
Need help?
Do you have a question about the SVC 3493 and is the answer not in the manual?
Questions and answers